In detail

Less Known Things About Baby Bottle Sterilization - A Practical Guide for Developing Parents

Less Known Things About Baby Bottle Sterilization - A Practical Guide for Developing Parents

Less Known Things About Baby Bottle Sterilization - A Practical Guide for Developing Parents

1. Why should the bottles be sterilized?

In the first year after birth, the immune system is not yet formed, so the baby is vulnerable to disease. If the bottles are not sterilized, viruses, bacteria and parasites can infect the baby. The child can develop any type of disease, starting with those irritations of the mouth and throat, recognized by the appearance of whitish spots, becoming in much more serious situations, such as vomiting or diarrhea.

2. What are the first steps to take in sterilizing baby bottles?

Before beginning the sterilization procedure, you must first clean both the used and the newly purchased bottles.

  • Use a dishwasher and detergent special brush;
  • Clean the container, nipple, nipple ring, lid and special teaspoon for milk powder. In this way, any trace of milk powder will be removed;
  • It is recommended that the accessories listed above be cleaned immediately after use, before the milk is dried;
  • Remember that after use, you also clean the brush for bottles, using hot water and detergent, then rinse well;
  • Give extra attention to cleaning the nipples, as traces of dry milk can withstand the sterilization process;
  • To completely clean the nipples, you can turn them "back" and do not forget to rinse them very well, to remove any trace of the detergent;
  • You can also use the dishwasher only if the manufacturer specifies that the bottles are resistant to such a washing process;
  • Check that the nipples and baby bottles are not damaged (scratched, cracked, cut). In this case you must dispose of them, because the bacteria seep into the damaged surfaces and survive both washing and sterilization processes.

3. How are the bottles sterilized?

There are several ways in which bottles can be sterilized. The most popular are: boiling, hot steam and microwave sterilization.

• Electric bottle sterilizer

Electric sterilizers are the most practical, fast and efficient method, the time allocated to such sterilization being about 15 minutes, including water heating, product sterilization and cooling.

The products inside the sterilizer can be kept sterile from 8 to 24 hours, under the condition that the lid remains in place. There are sterilizers that have a large storage capacity (6-7 bottles) and are equipped with a stand for accessories (nipples, teething toys, breast pump accessories, pacifiers).

Make sure that the baby's nipples, nipples or any such accessory are positioned face down when inserting into the sterilizer. Only then will you be sure that the products have been properly and completely sterilized.

Also, check that in the products introduced in one electric sterilizer to be suitable for steam sterilization. For example, there are certain breast pump accessories that can be damaged. In the same situation, there are gingival rings containing sterile water or gel, teaspoons of plastic or metal, as well as certain components of the pods.

• Microwave oven sterilizer

Certain baby bottles can be directly sterilized in the microwave oven. It is a fast method that you do not have to give more than 90 seconds. If you decide to use this method, do not forget to insert the unsealed bottles into the microwave oven, to avoid their implosion.

You can also use a sterilizer for the microwave oven, but be careful not to introduce any product that may contain metal. Sterilization can be carried out in a minimum of 5 minutes and a maximum of 8 minutes, depending on the manufacturer's recommendations, in addition to the time allocated to cooling the products.

The major advantage is that there is no smell or taste left after sterilization. The interior products remain sterile for 3 or 24 hours, depending on the model purchased, for as long as the lid remains positioned on the sterilizer.

• Boil sterilization

If the manufacturer recommends boiling bottle sterilization, you can use this method. In these conditions you will need a large, spacious container, equipped with a lid. It is preferable that it be new and try not to use it for any purpose other than for the sterilization of feeding bottles and accessories.

Fill the container with water and completely immerse the bottles and nipples. Make sure they do not "get air" inside, then cover the pot with a lid and let the water boil for 10 minutes. Do not lift the lid until you have decided to use a bottle.

If you use the boiling sterilization method, you should know that the nipples and bottles should be checked more often, because in this case the accessories deteriorate much faster than when using the hot or "cold" steam sterilization method.

• Cold sterilization

In this method you will use cold water and a special solution that you will dissolve in water. This type of solution destroys bacteria effectively and very safely. Remember, this solution should be changed every 24 hours and will be prepared according to the manufacturer's instructions. If the solution is too concentrated or too diluted, it may affect the product.

You can purchase special containers where you can prepare the solution or use a clean bucket with lid. Also, be sure to check if the products have "caught air".

Through this type of cold sterilization, the products must be immersed and kept in solution for 30 to 60 minutes. After the cold sterilization procedure is completed, each bottle or nipple should be rinsed well with plain water or tap water, boiled and then cooled.

The advantage of such a product for sterilization is that the products deteriorate more difficult, and, on the other hand, you can sterilize plastic or metal objects. There are such substances that can be used including for microbial decontamination of vegetables and fruits.

4. Sterilization is complete. What do we do next?

Do not remove the products from the sterilizer until the time of the meal has arrived. Keeping the bottles in the sterilizer, with the lid on, prevents their contact with germs.

Remember that before preparing the milk formula Disinfect the hands and the "work" surface well. Make sure that the sterilized bottles have not been exposed for too long, as they will no longer be sterile.

5. How long must the sterilization of the bottles continue?

The minimum recommended period is 1 year from the birth of the baby. As a mother you will probably think that sterilization has no purpose since the baby introduces into the mouth all kinds of toys or objects.

What we need to remember is the fact that his immune system is in the process of being trained, during which time he can become very ill. Only next year, the baby will begin to benefit from its own antibodies. Even in this case, it is recommended to sterilize the baby's nipples, nipples, pacifiers for as long as the baby uses them.

Tags Sterilization of baby bottles Chicco Parent Guide